IdealH2O RO 100GPD


Ideal H2O Reverse Osmosis System – 100 GPD


Reverse osmosis is one of the most cost effective and efficient ways to remove the majority of all contaminants from your water. Ideal H2O™ Reverse Osmosis Water Filtration Systems produce up to 100 gallons per day of ultra-pure, low parts per million (PPM) water. These 3 Stage RO systems remove more than 98% of chlorine and 90% of sediment, silt and rust. The Ideal H2O™ Systems include a high quality poly spun sediment pre-filter and an eco-friendly coconut carbon pre-filter. Ideal H2O™ RO Systems also come with a 2 in 1 flow restrictor/membrane flush valve preinstalled. This valve allows users to periodically flush out harmful build up in the membrane, extending the membrane’s life by up to 50%, all while using 25% less water than other RO systems on the market. Proudly assembled in the U.S.A.

Unique RO Membrane Flush Valve: The Ideal H2O RO units come with a unique membrane flush valve that will also help extend the life of your membrane. Flushing the RO membrane with this valve every 30 to 60 days will extend the membrane’s performance exponentially.

Ideal-H2O RO 100 GPD System Includes:

Poly Spun Sediment pre-filter – removes sediment, particulates, dirt and rust.
Coconut Carbon Block pre-filter – removes chlorine, odor, and other chemicals.
Reverse Osmosis Membrane – one 100 GPD filter – removes total dissolved solids.
System Pressure Gauge – measures water pressure and quickly identifies best pressure levels.
Water Source Inlet Tubing, 3/8″ (White) – w/ Garden Hose Connector (3/4″).
Filtered Water outlet Tubing, 1/4″ (Blue)
Waste Water Outlet Tubing, 1/4″ (Black)
Flow Restrictor/Membrane Flush Valve – reduces the amount of waste water produced by the system, and allows user to flush membrane periodically to extend the life of the RO membrane.
Shut Off Valve – Allows user to quickly turn off flow of water from the RO system.
Filter Wrench – for safe removal of filter housing.

Ideal-H2O RO 100 GPD Specifications:

Pressure: Min 40 PSI, Max 125 PSI
Temperature: Min 40 F, Max 110 F
Inlet TDS: Max 1000 PPM
Hardness: Max 10 grain (171 mg/l)
Operating pH: Min 3, Max 11
Permeate/Waste: 1 gallon permeate: 3 gallons waste

Ideal-H2O RO 100 GPD Maintenance and Filter Changes: The Ideal H2O reverse osmosis systems have pre-filters that need to be replaced after a certain period of use. By keeping up with the replacemen of your sediment, carbon, and membrane filters, you can double or even triple the life of your RO membrane. The length of time these RO filters will last is very dependent on how clean you water source is.

The RO membrane will usually last 6 months to 2 years. Again, by changing your sediment and carbon filters out regularly, your RO membrane will last much longer. If you notice PPM exceeding 100 PPM coming out of your RO system, it’s time to change out your RO membrane. Change your Sediment filter out every 6 to 12 months of use. Change your Carbon filter every 1,000 – 1,500 gallons of water put through the RO unit.


There are no reviews yet.

Be the first to review “IdealH2O RO 100GPD”

Your email address will not be published. Required fields are marked *